Is your HP touchpad not working anymore? Unable to use your laptop when your primary means of navigation, the cursor, is utterly useless might feel crippling.
Be at ease; there is usually a simple fix to get your laptop touchpad working once more. The following actions are given in order of easiest to do and most frequent problems.
Double Tap the Top Left Corner to Enable the HP Touchpad
Verify that the laptop touchpad has not unintentionally been deactivated or switched off. You should check to be sure and, if necessary, enable the HP touchpad once more if you accidentally disable your touchpad.
The most frequent fix is to double-tap the touchpad’s upper-left corner. A glowing small orange light usually means that the touchpad is broken and has been disabled.
Restart Your Computer
Perhaps all your computer needs is a reboot. Attempt restarting your computer right away if you haven’t already. If you don’t have an external mouse, press the Ctrl, Alt, and Delete keys simultaneously and tab until the power sign is highlighted. Press enter and then the up arrow till restart appears.
(You may also perform a hard restart by holding the power button and turning the device back on, but this is typically not advised since it could destroy any open files.)
Check For Computer Driver Updates
See whether an external mouse can be used.
If your computer’s external mouse isn’t working or you don’t have access to one, carefully follow the steps below to use the keyboard to browse.
Tip: We advise utilizing a program like Driver Support to update your computer drivers if you’ve never done it before or if you don’t feel confident doing it yourself. By safely checking your computer for outdated drivers and updating them automatically, the software saves you the time and frustration of attempting to resolve the issue on your own.
- Press the Windows key and press R. The “Run” window should pop up.
- Type devmgmt.msc and press enter.
- Expand the “Mice and other pointing devices” window. If you do not have access to a mouse, press tab once and use the down arrow on your keypad. The “right arrow” will expand the device section.
- Press enter on the “Synaptics” device and tab over on the window until you open the “Drivers” tab.
- Select update driver and automatically update the driver.
- Once complete, restart your computer.
- Make sure to unplug the USB mouse or any other devices before restarting.
Manually Reinstall or Update your HP Drivers
If your computer couldn’t update automatically, your files might be damaged, or you might need to obtain the drivers directly from the maker.
This should only be done if you are confident downloading and installing files onto your computer.
We advise installing and running Driver Support because it will scan your computer for any corrupted or missing files and update them automatically. Additionally, it will keep your computer updated so that you don’t experience this problem again.
It can be worth your time to let a software application handle the task if a driver problem also prevents your external mouse from functioning.
To avoid using your tab button to navigate the internet, you might also want to download the necessary driver updates from a different computer onto a flash drive.
Follow these instructions if you are comfortable downloading and installing software and are accustomed to using computers. visit APK Files to learn more about Apk software.
- Press the Windows key and press R. The “Run” window should pop up.
- Type devmgmt.msc and press enter.
- Expand the “Mice and other pointing devices” window. If you do not have access to a mouse, press tab once and use the down arrow on your keypad. The “right arrow” will expand the device section.
- Press enter on the “Synaptics” device and tab over on the window until you open the “Drivers” tab.
Check The HP Touchpad Driver Settings
The Touchpad may need to be manually turned on in your settings. While simultaneously pressing the Windows key and “I,” navigate to Devices > Touchpad by clicking (or tabling).
Open the Touchpad Settings window by selecting the Additional Settings option. You can turn on or off the HP touchpad settings from here.
To ensure the modifications take effect, restart your computer. If it is set to “on,” but the touchpad still isn’t functional, there might be a hardware problem with your device, or you might try using a program like Driver Support to resolve the problem.